Comtech EF Data CDM-425, Installation And Operation Manual

Page: 398 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Telnet Command Line Interface (CLI) Operation 9–8 MN-CDM-425
Note the following:
Selection Description
[ENTER]Select
Press [ENTER] to accept any updates or changes made on this page – this does not
save the selection to configuration memory, additional action is required.
[ESC] Back Press [ESC] to exit the current menu and return to the parent submenu.
[F5] Refresh
Press [F5] to discard any changes made on the page and restore all values from the
modem
[F8] Save Press [F8] to save the currently defined settings to configuration memory
[F9] Add Press [F9] to add a new index to a table (e.g., VLAN Table, Sect. 9.3.4.4.1)
[F10] Exit Press [F10] to end the CLI session and close the terminal emulator window
[F11] Delete
Press [F11] to delete an existing index from a table (e.g., VLAN Table,
Sect.9.3.4.4.1)
1. Any menu selection that requires user input typically features an input dialog window. Once
a menu option is selected, its dialog window opens and you must use the
↑↓
arrow keys to
select a functional choice:
Other dialog windows require entry of a
descriptive alphanumeric string or an
operational numeric value. This example
of the
Home > Administration >
SNMP: [A] Contact dialog window
shows “Remote A Site” as the Current
Value and prompts you to enter an
alphanumeric New Value :
Type the new parameter, and then press [ENTER] to accept the entry. The dialog window
closes and the CLI returns you to the active configuration page.