Comtech EF Data CDM-425, Installation And Operation Manual

Page: 245 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Ethernet-based Remote Product Management 7–21 MN-CDM-425
7.5.4.2.2 Admin | SNMP
•
Chapter 6. FRONT PANEL OPERATION
• Sect. 7.3 SNMP INTERFACE
The Administrator must use this page to set and return administration information for the
modem's SNMP feature.
Figure 7-7. Admin | SNMP Page
SNMP
•
Simple Network Management: Use the drop-down list to select as Disabled or
Enabled .
•
Enable Authentication Trap: Use the drop-down list to select as Disable or Enable .
Trap IP 1 / 2: Assign up to two SNMP Trap IP Addresses in the form xxx.xxx.xxx.xxx.
Trap Version: Use the drop-down list to select SNMPv1 or SNMPv2 .
•
Read Community String , Write Community String , SNMP Contact , SNMP Name ,
SNMP Location , and Trap Community String: Create or edit these alphanumeric text
strings as follows:
•
Setting Factory Default Typical Parameters
SNMP Read Community String public
The Read, Write, and Trap Community Strings
can be any alphanumeric combination with a
maximum length of 4 to 15 characters.
SNMP Write Community String private
SNMP Trap Community String comtech
SNMP Contact N/A
The SNMP Contact, Name, and Location strings
can be any alphanumeric combination with a
maximum length of 0 to 20 characters.
SNMP Name N/A
SNMP Location N/A