Comtech EF Data CDM-425, Installation And Operation Manual

Page: 506 / 744

CDM-425 Advanced Satellite Modem
Revision 0
ODU (Transceiver, BUC, LNB) Operation 10–16 MN-CDM-425
10.3.3.3.3.1.1.1 ODU: FSK-control

CSAT (2CSATs

CSAT #X)

Configuration

Tx
Tx: Fq=6247.0 MHz Att=23.00 dB Amp=On
Mute=Unmuted Slope: xxx, Cal (

)
Use the
◄ ►
arrow keys to select a setting, and then use the
▲▼ arrow keys to change that
setting:
Selection Setting
Fq (Tx Frequency) 3625-4200 MHz, in steps of 1.0 or 2.5 MHz
At (Tx Attenuation ) 0 to 25 dB, in increments of .25dB
Amp (Amplifier setting ) Off or On
Mute (Mute setting) Muted (i.e., Tx off) or Unmuted (i.e., Tx on)
Slope Manual (0.0 to 1.0, in increments of 0.1) or Calibrated
Press ENTER to save, or CLEAR to cancel and return to the previous menu.
10.3.3.3.3.1.1.2 ODU: FSK-control

CSAT (2CSATs

CSAT #X)

Configuration

Rx
Rx: Fq=6427.0 MHz Att=23.00 dB
Mute=Unmuted Slope:x.x, Cal(

)
Use the
◄ ►
arrow keys to select a setting, and then use the
▲▼ arrow keys to change that
setting:
Selection Setting
Fq (Rx Frequency) 3625-4200 MHz, in steps of 1.0 or 2.5 MHz.
Att (Rx Attenuation) 0 to 25 dB, in increments of .25dB.
Mute (Mute setting) Muted (i.e., Tx off) or Unmuted (i.e., Tx on).
Slope Manual (0.0 to 1.0, in increments of 0.1) or Calibrated.
Press ENTER when done.