Comtech EF Data CDM-425, Installation And Operation Manual

Page: 257 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Ethernet-based Remote Product Management 7–33 MN-CDM-425
Use the ‘ Configuration | Modem ’ page to configure these modem operating parameters:
•
Tx / Rx Interfaces and Framing*
•
Carrier-in-Carrier (CnC) Parameters
•
Tx / Rx Operating Parameters
•
IP-ACM or VersaFEC-2 ACM
Parameters
*The Tx / Rx Interface Types and Framing Modes have higher priority than other
parameters, and should be configured before setting other parameters.
The page appearances changes with your selection of operating mode. Figure 7-13 shows this
page as it appears when any non-ACM operating mode is active. When IP-ACM or V2-ACM is
selected, an additional area pertinent to IP-ACM (Figure 7-14) or V2-ACM (Figure 7-15) appears
to the right of the Carrier-in-Carrier (CnC) section.
Detailed information on operation and configuration settings is provided elsewhere in this manual.
See
Chapter 6. FRONT PANEL OPERATION, Appendix F. D
OUBLETALK
C
ARRIER
-
IN
-C
ARRIER
(C
N
C) OPTION and Appendix K. V
ERSA
FEC/V
ERSA
FEC-2 ADAPTIVE CODING AND
MODULATION (ACM) OPTION .
Click [Submit] to save any changes and settings.