Comtech EF Data CDM-425, Installation And Operation Manual

Page: 426 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Telnet Command Line Interface (CLI) Operation 9–36 MN-CDM-425
Hot Key [F] – D&I++ Table
The D&I++ Table dialog window shows the current value for the table. To edit the table value,
press
A , and then enter a new value*. Press [ENTER] to accept the change or [ESC] to
return to the D&I dialog window. See CHAPTER 8. SERIAL-BASED REMOTE PRODUCT
MANAGEMENT, SECT. 8.5.5 Bulk Configuration Strings . Refer to this section for correct
syntax, see the DNI Command/Query Description of Arguments column.
Hot Key [G] – D&I Quad Table
The D&I Quad Table dialog window shows the current value for each table. To edit a table
value*, press
A (Quad Drop And Insert Port 1), B (Quad Drop And Insert Port 2), C (Quad
Drop And Insert Port 3), or D (Quad Drop And Insert Port 4). See CHAPTER 8. SERIAL-
BASED REMOTE PRODUCT MANAGEMENT, SECT. 8.5.5 Bulk Configuration Strings .
Refer to this section for correct syntax, see the DNI Command/Query Description of
Arguments column.