Computer Automation Technology CAT-800, Manual

Page: 3 / 105

I-2
Chapter 5 Repeater Programming by DTMF Commands
Initialization 5-1
Programming the Master Unlock Number 5-1
Locking the Controller 5-1
Internal Command Assignment Table 5-2
Program Scheduler Event Macros 5-4
Day of Week Scheduler Programming Table 5-5
Program User Macros 5-6
User Macro Default Table 5-7
Program Event Macros 5-8
Event Macro Default Table 5-9
Set Clock Time 5-10
Program DTMF Muting Override Command 5-11
Program Forced Entry Command 5-11
Program Voice Messages 5-11
Voice Message Table 5-11
Program CW Identification 5-12
CW ID Message Table 5-12
CTCSS Logic Table 5-12
Program User Function Output Switch Assignment 5-13
User Function Output Switch Table 5-13
Program Control Codes and Prefix Numbers 5-14
Program Timers 5-15
Program Courtesy Tones 5-17
Courtesy Tone Programming Table 5-18
Program Paging Tone 5-19
Paging Tone Programming Table 5-19
Audio Test Tone 5-19
Exit Programming Mode 5-19
DTMF Programming Command Table 5-20
Chapter 6 Interfacing to Other Equipment
Connection to Repeater Transmitter 6-1
Connecting to Repeater Receiver 6-1
Connecting to CTCSS Decoder 6-1
Checking PTT and COR Activity 6-1
Checking DTMF Decoder Activity 6-1
Receiver De-emphasis 6-2
Transmit Audio Adjustment 6-2
Voice Synthesizer Adjustment 6-2
Interface Review Table 6-2
LED Display Indicators 6-2
Power Supply 6-2
Connector Kit 6-2