Computer Automation Technology CAT-800, Manual

Page: 77 / 105

9-9
Zone 7 / 8 Control channels
7-1. Repeater Voice ID Enable (Event Macro 17)
When the box is checked, the CAT- 800 will execute Event Macro 17 identifying the repeater’s
transmitter in voice. Voice message #1 is assigned as the default message.
7-2. Repeater CW ID Enable (Event Macro 19)
When the box is checked, the CAT- 800 will execute Event Macro 19 identifying the repeater’s
transmitter in CW by sending the CW buffer.
7-3. Transmitter Turn Off Message #1 Enable (Event Macro 27)
When the box is checked, the transmitter drop out message #1 will occurs when a repeater user un-
keys their transmitter. This message will repeat subject to the setting of the turn off message timer.
7-4. Transmitter Turn Off Message #2 Enable (Event Macro 28)
When the box is checked, the transmitter drop out message #2 will occur just before the repeater
transmitter turns off. This message will repeat subject to the setting of the turn off message timer.
7-5. Timed Message #1 Enabled (Event Macro 29)
When the box is checked, timed voice message #1 will occur on a regular schedule subject to the
setting of the timed message #1 timer and event macro #29. This message will consist of up to 15
words selected from the voice vocabulary table.