9-10
7-6. Timed Message #2 Enabled (Event Macro 30)
When the box is checked, timed voice message #2 will occur on a regular schedule subject to the
setting of the #2 timer and event macro #30. This message will consist of up to 15 words selected from
the voice vocabulary table.
7-7. Timed Message #3 Enabled (Event Macro 31)
When the box is checked, timed voice message #3 will occur on a regular schedule subject to the
setting of the #3 timer and event macro #31. This message will consist of up to 15 words selected from
the voice vocabulary table.
7-8. Timed Message #4 Enabled (Event Macro 32)
When the box is checked, timed voice message #4 will occur on a regular schedule subject to the
setting of the timed message #4 timer and event macro #32. This message will consist of up to 15
words selected from the voice vocabulary table.
8-1. Forced DTMF Entry D Key Enable (ALL PORTS)
When the box is checked it is possible to force a DTMF command even while the port is active. To force
a DTMF command, end the command with a [D].
8-2. DTMF Access Enable (ALL PORTS)
When the box is checked, the repeater will go to sleep and not respond to normal inputs. If a repeater
user enters the default DTMF Access number [325] the repeater will wake-up and continue to operate
until a period of inactivity occurs determined by the sleep timer.
8-3. Time of Day Request Enable (ALL PORTS)
When the box is checked, repeater users can request the time of day by entering the default time of day
request number [400].
8-4. DTMF Keypad Test (ALL PORTS)
When the box is checked, a repeater user is able to perform a test of their radio's 12 or 16-button
keypad. Enter the default keypad test number [475] followed by each of the keypad digits. As the
numbers are being decoded, they are stored in memory. When the user stops transmitting the
controller will read back all the numbers that were decoded. The Forced DTMF Entry key is defaulted to
the [D] key. It must be entered last and it will not read back during the keypad test.
8-5. Voice Demo Request Enable (ALL PORTS)
When the box is checked, repeater users can play any of the twenty voice synthesizer messages. Enter
the voice demo request number [700] followed by the two-digit message number.
8-6. Two Tone Sequential Paging Enable (ALL PORTS)
When the box is checked, a repeater user can transmit a two-tone page. The first tone will be on for
one second while the second tone will be on for three seconds. Memory space is provided for twenty
paging tones. Enter the default paging tone request number [650] followed by the desired two-digit
paging tone table position.
8-7. Digital Audio WAV Player (ALL PORTS) (Optional DR-800 Required)
When this channel is enabled, a repeater user can play digital audio tracks. Memory space is provided
for thirty tracks. Enter the digital audio WAV player request number [725] followed by the two-digit
track number. Digital audio tracks can also be integrated into user and event macros.
8-8. Reserved
Summary of Contents for CAT-800
