Computer Automation Technology CAT-800, Manual

Page: 17 / 105

3-2
CAT-800 Repeater Control Channels
Zone 1
Zone 2
Zone 3
Zone 4
NOTE: (*) Indicates the channel’s default setting.
1 PORT #1 TRANSMIT ENABLE*
2 PORT #1 CTCSS ENABLE
3 PORT #1 RECEIVER ENABLE*
4 PORT #1 TURN ON DELAY ENABLE
5 PORT #1 TRANSMITTER HANG TIME ENABLE*
6 PORT #1 COURTESY TONE ENABLE*
7 PORT #1 DTMF MUTING ENABLE
8 PORT #1 TIMEOUT ENABLE*
1 PORT #2 TRANSMIT ENABLE*
2 PORT #2 CTCSS ENABLE
3 PORT #2 RECEIVER ENABLE*
4 PORT #2 TURN ON DELAY ENABLE
5 PORT #2 ECHOLINK® CONTROL ENABLE
6 PORT #2 AUTO-DISCONNECT ENABLE
7 PORT #2 DTMF MUTING ENABLE
8 PORT #2 TIMEOUT ENABLE*
1 PORT #3 TRANSMIT ENABLE*
2 PORT #3 CTCSS ENABLE
3 PORT #3 RECEIVER ENABLE*
4 PORT #3 TURN ON DELAY ENABLE
5 PORT #3 ECHOLINK® CONTROL ENABLE
6 PORT #3 AUTO-DISCONNECT ENABLE
7 PORT #3 DTMF MUTING ENABLE
8 PORT #3 TIMEOUT ENABLE*
1 PORT #2 CONTROL OPERATOR ENABLE*
2 PORT #2 MACRO CONTROL ENABLE*
3 PORT #3 CONTROL OPERATOR ENABLE*
4 PORT #3 MACRO CONTROL ENABLE*
5 SCHEDULER ENABLE*
6 RESERVED ENABLE
7 GRANDFATHER CLOCK ENABLE*
8 GRANDFATHER CLOCK SLEEP MODE ENABLE*