Computer Automation Technology CAT-800, Manual

Page: 68 / 105

8-10
Internet Configuration File Transfer / Clock Set
If the CAT-800 is at a remote location you can transfer your configuration file through the Internet. Click
the configuration file transfer button at the top of the main editor window.
Enter the IP address in the
window and click the Login button. A green Pass should appear. Click the Upload button to send your
configuration data to the CAT-800 or click the Download button to receive the CAT- 800’s current
configuration.
NOTE: To login, the user name and password in your current configuration file must be the same and the
user name and password stored in the CAT800 controller.
NOTE:
Internet communications between your computer and the CAT-800 uses port 1465 UDP. The
CAT- 800 requires a static IP address. You will need to open this port on your router and computer’s
firewall protection program as well as the router connected to the CAT-800.
NOTE: If port 1465 UDP conflicts with other devices in your system this port can be changed.
Set the CAT-800 Clock (Internet)
This window displays the time of your computer’s clock. If the time is correct click the “Set Clock” button.
When the button turns green the CAT- 800’s clock has been set.
CAT-800 Help
Click the HELP icon to display the event macro table, internal command table, voice message table and
vocabulary word list. The internal commands are a series of four digit numbered commands used to
program the CAT-
800’s User and Event Macro strings and the five hardwa re input switches.