Computer Automation Technology CAT-800, Manual

Page: 26 / 105

3-11
Zone 7 Control Channels
1. Repeater Voice ID Enable (*) (Event Macro 17)
When this channel is enabled, the CAT- 800 will execute Event Macro 17 identifying the repeater’s
transmitter in voice. Voice message #1 is assigned as the default message.
2. Repeater CW ID Enable (*) (Event Macro 19)
When this channel is enabled, the CAT- 800 will execute Event Macro 19 identifying the repeater’s
transmitter in CW by sending the CW buffer.
3. Transmitter Turn Off Message #1 Enable (Event Macro 27)
When this channel is enabled, the transmitter drop out message #1 will occurs when a repeater user un-
keys their transmitter. This message will repeat subject to the setting of the [*611*] turn off message
timer. This message will consist of up to 15 words selected from the vocabulary table and programmed
with the [*3102*] command.
4. Transmitter Turn Off Message #2 Enable (Event Macro 28)
When this channel is enabled, the transmitter drop out message #2 will occur just before the repeater
transmitter turns off. This message will repeat subject to the setting of the [*612*] turn off message
timer. This message will consist of up to 15 words selected from the voice vocabulary table and is
programmed with the [*3103] command.
5. Timed Message #1 Enabled (Event Macro 29)
When this channel is enabled, timed voice message #1 will occur on a regular schedule subject to the
setting of the [*607*] timed message #1 timer and event macro #29. This message will consist of up
to 15 words selected from the voice vocabulary table and is programmed with the [*3104*] command.
6. Timed Message #2 Enabled (Event Macro 30)
When this channel is enabled, timed voice message #2 will occur on a regular schedule subject to the
setting of the [*608*] timed message #2 timer and event macro #30. This message will consist of up
to 15 words selected from the voice vocabulary table and is programmed with the [*3105*] command.
7. Timed Message #3 Enabled (Event Macro 31)
When this channel is enabled, timed voice message #3 will occur on a regular schedule subject to the
setting of the [*609*] timed message #3 timer and event macro #31. This message will consist of up
to 15 words selected from the voice vocabulary table and is programmed with the [*3106*] command.
8. Timed Message #4 Enabled (Event Macro 32)
When this channel is enabled, timed voice message #4 will occur on a regular schedule subject to the
setting of the [*610*] timed message #4 timer and event macro #32. This message will consist of up
to 15 words selected from the voice vocabulary table and is programmed with the [*3107*] command.