Computer Automation Technology CAT-800, Manual

Page: 48 / 105

5-19
COURTESY TONE PROGRAMMING TABLE
TONE FREQUENCY (Hz)
01=207 06=277 11=370 16=493 21=660 26=880 31=1174
02=220 07=293 12=392 17=523 22=698 27=932 32=1244
03=233 08=311 13=415 18=554 23=740 28=987
04=246 09=330 14=440 19=587 24=784 29=1046
05=261 10=349 15=466 20=622 25=830 30=1108
Tone Duration (Milliseconds)
0=0 1=50 2=100 3=150 4=200
5=250 6=300 7=350 8=400 9=450
To program a multiple courtesy tone, key-up and send [*92X], followed by the desired tone frequency,
duration and separation numbers. Example: Program courtesy tone table location 2 with a three-
frequency courtesy tone.
Erase Courtesy Tone (1-8)
Key-up and send [*93X]. Un-key and the voice will say: "CONTROL OK."
Paging Tone Memory
The CAT-800 will generate two-tone sequential paging tones. The first tone will be on for one second
while the second tone will be on for three seconds. Memory space is provided for five paging tones. See
the Two-Tone Sequential Paging Frequency Table.
Send Paging Tone Locations (01-05)
Key-up and send [*97XX]. Un-key and the CAT-800 will send the paging tones stored at that memory
location. If the location is empty, the voice will say: "POSITION XX IS CLEAR." During this send
command, the length of each tone is increased to four seconds to provide time to measure the frequency
on a counter.
Tone #1 Frequency [440Hz]
Tone #1 Duration [100msec]
Table Position Time #1 Separation [50msec]
Programming Command *92 2 14 2 1 20 3 2 32 4
Tone #2 Frequency [622Hz] Tone #3 Duration [200msec]
Tone #2 Duration [150msec] Tone #3 Frequency [1244Hz]
Time #2 Separation [100msec]