15-1
Chapter - 15 Controller Projects
Project #1 -
“Emergency Power Announcement”
This project turns on Timed Message #1 to announce to repeater users that the repeater is operating
on emergency power. When line power is restored the message turns off.
1.
Unlock the controller to place the controller in programming mode.
Key-up and enter: [1234567]
2.
Program timed message #1 to say: “EMERGENCY POWER”
Key-up and enter: [*3104 344 695]
3.
Program timed message #1 to repeat every ten minutes.
Key-up and enter: [*607* 600]
4.
Program logic input #1 to turn off and on timed message #1.
Key-up and enter: [*1707 1 * 1750] Key-up and enter: [*1708 1 * 1751]
5.
Lockup the controller to return it to normal operation.
Key-up and enter: [*0]
6.
Connect a 5 or 12 VDC wall wart to the controller. Connect the (+) lead to J1-1 and the (-)
lead to J1-8.
7.
Turn on Zone 5 Channel 1.
Key-up and enter: [100 511]
Project #2 -
“Emergency Net Announcement”
This project turns on Timed Message #2 at 6:00 AM to remind repeater users to check into the
emergency net at 7:00PM each Monday night. At 7:15 PM Message #2 will turn off.
1.
Unlock the controller to place the controller in programming mode.
Key-up and enter: [1234567]
2.
Program Timed Message #2 to say: “CHECK IN TO THE EMERGENCY NET TONIGHT AT SEVEN
P M” every thirty minutes throughout the day.
Key-up and enter: [*3105 281 475 002 830 623 842 239 007 030 680 580]]
3.
Schedule message #2 to turn on at 6:00 AM every Monday morning.
Key-up and enter: [*1140 06 00 02] Key-up and enter: [*1740 1 1761]
4.
Schedule message #2 to turn off at 7:15 PM every Monday night.
Key-up and enter: [*1141 19 15 02] Key-up and enter: [*1741 1 1760]
5.
Lockup the controller to return to normal operation.
Key-up and enter: [*0]
Project #3 -
“Unique Repeater Off/On Command”
This project sets up a unique DTMF command to turn the repeater off and a unique DTMF command to
turn the repeater back on with a voice announcement for each.
1.
Unlock the controller to place the controller in programming mode.
Key-up and enter: [1234567]
2.
Program User Macro #20 to turn off the repeater with the DTMF command [123] and
announce that the repeater is being turned off.
Key-up and enter: [*1420 1 * 123 * 6511 9746 9654 6510 1110]
3.
Program User Macro #21 to turn on the repeater with the DTMF command [321] and
announce that the repeater is back on.
Key-up and enter: [*1421 1 * 321 * 1111 6511 9746 9656 6510]
4.
Lockup the controller to return to normal operation.
Key-up and enter: [*0]
Summary of Contents for CAT-800
