Computer Automation Technology CAT-800, Manual

Page: 40 / 105

5-11
Program DTMF Muting Override Command [*28X]
With DTMF muting enabled, there may be times when it is desirable to pass the DTMF tones to the
transmitter. To temporarily disable DTMF muting, precede the DTMF string with a pound [#]. This
key can be changed with the [*28X] programming command. To change this key to [A], key-up and
send [*28A]. Un-
key, the voice will say: “CONTROL OK.” Select [*], [#], [A], [B], [C], or [D]. To read
the command, key-up and send [*28].
Program Forced Entry Command [*29]
DTMF commands are entered when the port goes inactive. To force a DTMF command when the port is
active, end the command with a [D]. This key can be changed with the [*29X] programming command.
To change this key to [#], key-up and send [*29#]. Un-key, the voi
ce will say: “CONTROL OK.” Select
[*], [#], [A], [B], [C], or [D]. To read the command, key-up and send [*29].
Send Voice Message [*3001]-[*3020]
Key-up and send [*3001]. Un-key and the voice synthesizer will say the voice ID message #1.
Program Voice Message [*3101]-[*3120]
Key-up and send [*31XX] followed by the message number and three digit numbers that represent the
words required to construct the ID. Memory space is provided for 15 entries. Refer to the Voice
Vocabulary Word List. Example: Load
Repeater Port #1 ID with "W4XYZ Repeater”.
DEFAULT VOICE MESSAGE TABLE
01 REPEATER VOICE ID “CAT - 800 REPEATER”
02 TRANSMITTER TURN OFF MESSAGE #1 “TRANSMITTER OFF MESSAGE #1”
03 TRANSMITTER TURN OFF MESSAGE #2 “TRANSMITTER OFF MESSAGE #2”
04 TIMED MESSAGE #1 “TIME MESSAGE 1”
05 TIMED MESSAGE #2 “TIME MESSAGE 2”
06 TIMED MESSAGE #3 “TIME MESSAGE 3”
07 TIMED MESSAGE #4 “TIME MESSAGE 4”
08 GRANDFATHER CLOCK MESSAGE “CAT - 800 THE TIME IS”
09 TIME OF DAY REQUEST MESSAGE “THE TIME IS”
10 MESSAGE 10 “MESSAGE 10”
11 MESSAGE 11 “MESSAGE 11”
12 MESSAGE 12 “MESSAGE 12”
13 MESSAGE 13 “MESSAGE 13”
14 MESSAGE 14 “MESSAGE 14”
15 MESSAGE 15 “MESSAGE 15”
16 MESSAGE 16 “MESSAGE 16”
17 MESSAGE 17 “MESSAGE 17”
18 MESSAGE 18 “MESSAGE 18”
19 MESSAGE 19 “MESSAGE 19”
20 MESSAGE 20 “MESSAGE 20”
Erase Synthesized Voice Message [*3201]-[*3220]
Key-up and send [*32XX]. Un-key and the voice will say: "CONTROL OK." The voice ID will be erased.
Message Number W 4 X Y Z Repeater
Programming
Command
*31 01 890 004 920 930 960 746