Computer Automation Technology CAT-800, Manual

Page: 31 / 105

5-2
CAT-800 Internal Command Assignments
The Internal Command Structure is a series of four digit commands used to program the CAT- 800’s User
and Event Macro strings and the five hardware input switches.
INTERNAL COMMAND TABLE
COMMAND CHANNEL ACTION
CONTROL REPEATER ZONE 1 11 1-9 0=OFF 1=ON
CONTROL REPEATER ZONE 2 12 1-9 0=OFF 1=ON
CONTROL REPEATER ZONE 3 13 1-9 0=OFF 1=ON
CONTROL REPEATER ZONE 4 14 1-9 0=OFF 1=ON
CONTROL REPEATER ZONE 5 15 1-9 0=OFF 1=ON
CONTROL REPEATER ZONE 6 16 1-9 0=OFF 1=ON
CONTROL REPEATER ZONE 7 17 1-9 0=OFF 1=ON
CONTROL REPEATER ZONE 8 18 1-9 0=OFF 1=ON
CONTROL REPEATER ZONE 9 19 1-9 0=OFF 1=ON
COMMAND COMMENTS
PLAY TIME OF DAY 2000 -----
PLAY DAY OF WEEK 2001 -----
PLAY DAY AND MONTH 2002 -----
PLAY SALUTATION 2003 -----
PLAY VOICE MESSAGE (V/S Mixes with RX Audio) 30XX 02-20
PLAY VOICE MESSAGE (V/S Stops RX Audio only) 31XX 02-20
PLAY VOICE ID (V/S ID Message 01 Only) (See Note Table 5-4) 3200 -----
PLAY WAV ID (WAV Track ID Message 01 Only) (See Note Table 5-4) 3300 -----
PLAY CW ID BUFFER 3400 -----
PLAY CW CHARACTER 35XX 00-46
PLAY DIGITAL AUDIO WAV TRACK (WAV Mixes with RX Audio) 36XX 01-30
PLAY DIGITAL AUDIO WAV TRACK (WAV Stops RX Audio only) 37XX 01-30
PLAY COURTESY TONE 4000 -----
LOAD COURTESY TONE PORT #1 (Receiver Active) 401X 1-8
LOAD COURTESY TONE PORT #2 (Receiver Active) 402X 1-8
LOAD COURTESY TONE PORT #3 (Receiver Active) 403X 1-8
PLAY TWO-TONE PAGING TONE 42XX 01-05
AUDIO SWITCH SW [VOICE TO TX1] 501X 0=OFF 1=ON
AUDIO SWITCH SW [VOICE TO TX2] 502X 0=OFF 1=ON
AUDIO SWITCH SW [VOICE TO TX3] 503X 0=OFF 1=ON
AUDIO SWITCH SW [VOICE TO TX1-TX2] 512X 0=OFF 1=ON
AUDIO SWITCH SW [VOICE TO TX1-TX3] 513X 0=OFF 1=ON
AUDIO SWITCH SW [VOICE TO TX1-TX2-TX3] 514X 0=OFF 1=ON
AUDIO SWITCH CONTROL [WAV PLAYER TO TX1] 521X 0=OFF 1=ON
AUDIO SWITCH CONTROL [WAV PLAYER TO TX2] 522X 0=OFF 1=ON
AUDIO SWITCH CONTROL [WAV PLAYER TO TX3] 523X 0=OFF 1=ON