Compulite Vector Ultra Violet User Manual Download

Page: 94 / 136

Compulite

Chapter 5

Paging faders and Qkeys

There are 5 fader pages and 5 Qkey pages for Vector Red and Vector
Violet. There are 10 fader pages and 10 Qkey pages for Vector Blue,
Green and Vector Orange and Vector PC.

This comprises 100 playback faders and 100 Qkeys per snap.

To page faders

Arrow

to page up; the page number appears in the faders' LCD

display and on the playback wing displays.
Arrow

DOWN

to page down; the page number appears in the faders' LCD

display and on the playback wing displays.

Figure 25: Playback device (faders and QKeys) paging controls

Note:

When paging the playback wing faders, the QKeys are also

paged in the background.

To page Qkeys

Press

PB/QKEY DISPLAY

to toggle the playback wing and use the arrow

keys. The page number appears in the LCD display and on the playback
wing displays.

Note:

On the actual

console the up and
down keys are
represented by arrows.

Summary of Contents for Vector Ultra Violet









































































































































Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands

Compulite Vector Ultra Violet, User Manual

Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands