Compulite Vector Ultra Violet Page 58 User Manual Download

Page: 58 / 136

Compulite

Chapter 3

Output color code

The default color scheme for the console’s output shows the output
source:

Color

What it means

Yellow

Fixture numbers for fixtures that are active in
the editor.

Red Backround

Values active in the editor and currently under
wheel control.

White Background

Values in the editor, but not currently under
wheel control.

Blue

Output from Master PB values that are higher
than those in the previous cue for the same
fixtures.

Green

Master playback output values that are lower
than those in the previous cue for the same
fixtures.

Yellow

Output from the playback devices (faders and
QKeys).

Purple

Tracking in Master PB.

Red

Redundant tracking in Master PB.

Note:

Values displayed in white and red are the values normally included

when storing a cue. More specific store commands are available in the

Store Options

dialog box; see the Vector Reference Guide.

Summary of Contents for Vector Ultra Violet









































































































































Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands

Compulite Vector Ultra Violet, User Manual

Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands