Compulite Vector Ultra Violet Page 85 User Manual Download

Page: 85 / 136

VECTOR

PROGRAMMING AND UPDATING CUES

Updating cues

Edit cues using the

UPDATE

STORE

keys. As a rule of thumb, use

UPDATE

to edit cues that are output from one of the playback devices.

Use

STORE

for cues that are not output on a playback device.

Pressing

UPDATE

when editing cues, opens the

Update Items

dialog box.

Figure 21: Update Items dialog box

The cues, which are currently output from a playback device and will be
changed by completing the update command, are listed in the

Cue

column. Libraries that can be updated are listed in the

Library

column.

The buttons at the bottom of the dialog offer options to filter the update
command.

Summary of Contents for Vector Ultra Violet









































































































































Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands

Compulite Vector Ultra Violet, User Manual

Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands