Compulite Vector Ultra Violet Page 25 User Manual Download

Page: 25 / 136

VECTOR

SETTING UP AND OVERVIEW

To add and configure workspaces

In the window, right click anywhere and choose

Add View

on the right

click menu.

Go to the

Window



Window

Options

and choose

Add Workspace

A workspace is added to the window. Its tab appears to the right of
the last tab.

Right click the new tab.
The display control, right click menu opens.

Choose

Rename View

Type a new name for the workspace and press

ENTER

Through the

Window

menu divide the workspace into panes and add

tabs, as necessary.

Open the

Workspace

tree

.set up the view. (See:

“Using the

Workspace tree” on page 20

Example:

If you have created a Live workspace, you will probably

want to show the live fixture displays, the master playback display,
and the playback wing display.

Optional - Save this as a display layout (See:

“To save a workspace”

on page 25

Summary of Contents for Vector Ultra Violet









































































































































Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands

Compulite Vector Ultra Violet, User Manual

Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands