manualshive.com logo in svg

Compulite Vector Ultra Violet, User Manual

Share
Download
Compulite Vector Ultra Violet User Manual Download Page 125

119

VECTOR

PROGRAMMING EFFECTS

3.

Optional - select parameters. 

If no parameters are selected, then effects are released from all 
parameters.

4.

Press 

EFFECT

. 

The 

Effect Editor 

opens.

5.

Press 

RELEASE

. 

The selected fixtures and parameters are released from the effect. 

The 

Effect Editor

 closes.

6.

Press 

UPDATE

.

To release all active effects from all fixtures 

1.

Press 

EFFECT

. 

The 

Effect Editor

 opens.

2.

Press 

RELEASE

. 

All effects are released from all parameters. 

To release effects from cues

1.

Tap 

EDIT CUE

. 

2.

Choose the cue.

3.

Press 

ENTER

.

4.

Press 

RELEASE

. 

5.

Select the fixtures.

6.

Optional - select the parameters. If no parameters are selected, 
then all parameters are released from the effect.

7.

Press 

EFFECT

. 

The 

Effect Editor

 opens.

8.

Press 

ENTER

.

Summary of Contents for Vector Ultra Violet









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands