Compulite Vector Ultra Violet User Manual Download

Page: 88 / 136

Compulite

Chapter 4

Blind Mode

You can program and update cues in the blind Mode. When the blind
mode is active, the fixture values in the live editors are not output.

When

BLIND

is active it is indicated in the command line:

Using the blind editor

To activate the blind editor

Press

BLIND

The key’s LED is on.

To store cues in blind mode

Press

BLIND

to switch to the blind editor.

Select fixtures and assign values.

Use any store sequence, including

STORE

SELECT

Note:

When storing a cue in blind mode, the playback device does not

advance to the new cue.

To exit the blind editor

Press

BLIND

The key’s LED turns off and the blind editor indication is removed from
the command line.

Summary of Contents for Vector Ultra Violet









































































































































Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands

Compulite Vector Ultra Violet, User Manual

Search results

Summary of Contents for Vector Ultra Violet

Reviews:

Related manuals for Vector Ultra Violet

Brands by name

Popular brands