Compsee
32
Apex-0698-Part 2: Apex-trak
Part 2
In order to download a program, the Apex II must be in the immediate mode, described in Parts 1 and 3 of this
manual.
The easiest way to prepare the Apex II to receive a program is to reboot the Apex II with the following procedure.
Turn the Apex II off. Then press and hold <ALT><
.
> keys while turning on the Apex II. The screen displays a
SYSTEM REBOOT
message.
Then the Compsee logo screen indicates the Apex II is ready to receive a
program.
C o p y r i g h t 1 9 9 6
C o m p s e e
_ 1 2 8 K
To Download the Apex-Trak program, perform the following procedure on the PC and the Apex II.
1. Connect your Apex II terminal into your PC's serial port using the Compsee cable 0227001 356. Assure that
cable coming from the Apex II is physically connected to the computer port selected on the PC LinkMaster
program. Page 29 describes the port selection procedure.
2. Assure that the Apex II MODE is set at 5,3. Part 1, Section 2 of this manual describes the MODE keyboard
command.
3. Run the LinkMaster program on the PC.
If necessary, install [Linkmstr.exe] from the diskette you received with the Apex II. To launch the LinkMaster
program, type LinkMstr at the DOS prompt or run the program from Windows
. The LinkMaster main menu is
displayed.
4. Use the arrow keys to select the File menu option. Select the Download Program option. Then press
<ENTER>.
A dialog (below), prompts you to type the program file name.
File
Apex
Setup
Quit
Download Data File
Retrieve Data File
Download Program
Download OS
Enter File Name:
This pr
handhel
Apex II
Please use your arrow keys to select a menu choice.
01-19-1996
15:52:45
