manualshive.com logo in svg

Compsee apex II, Operating & Programming Manual, Page: 27 / 56

Share
Download
Compsee apex II Operating & Programming Manual Download Page 27

Compsee  

 

27  

Apex-0698-Part 2: Apex-trak 

 

Part 2 

 

 

Transfer Data To a PC 

Periodically, operators transfer data that is gathered with, and stored in, the Apex II to the PC through an RS-232 
cable to a host system, either directly to an ASCII file on the PC or via a Compsee Wedge. 
 
Before transferring data, assure that the appropriate RS-232 cable is connected to the cable port (Figure 2-4) on the 
Apex II. 
 

0227001 

9 pin cable for direct connection to PC. 

0227004 

25 pin cable for direct connection to PC. 

0227002 

Cable for connection to Compsee QuickReader auxiliary port. 

0227003 

Cable for connection to Compsee QuickLink auxiliary port. 

 

In addition, assure that the upload option on the Apex II (page 24) is set to the 
desired mode of transfer: RS-232 or RS-232 via a keyboard wedge. 

D a t a   U p l o a d  

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  

H o s t   C o n n e c t i o n  
( R S - 2 3 2 )     W e d g e _  

 
If you are transferring data via a Communications Utility Program other than LinkMaster, perform the procedure 
beginning on page 27. 
 
If you are transferring data via LinkMaster, perform the procedure beginning on page 28. 
 
If you are transferring data via a Wedge, perform the following procedure. 

 
Transfer Data To a PC Via a Wedge 

 
Perform the following procedure from the Apex-Trak main menu. 
 

1.  Select A)sset Invent, I)tem Track, or P)hysical Invent. 

 

The associated menu is displayed. 

 Press 

<T>. 

 

The Wedge Upload screen is displayed.  Refer to the Compsee QuickLink or 
QuickReader Wedge Manual for procedures. 

W e d g e   U p l o a d  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  

W a i t i n g   o n   W e d g e  
A   t o   A b o r t . . . _  

NOTES: 

a.  Apex-Trak transfers data to a wedge in blocks of records. Whether data is transmitted automatically or 

manually, the number of records transferred to the wedge in each block can be set using the Upload Options 
procedure described on page 24. 

b.  If data is transmitted automatically, blocks of data are sent to the wedge automatically separated by pauses 

using the Upload Options procedure described on page 24. 

c.  If data is transmitted manually, blocks of data are sent to the wedge when the operator is prompted to press 

any key on the Apex II and does so.   

 

Summary of Contents for apex II

























































Reviews:

No comments