INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 218
INSTRUCTION MANUAL
CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
MVR SFM Information
Each page shows up to 99 entries from the MVR SFM Information Table, default being 20, selected
through the “entries per page” input field. When first visited, the web page will show the first 20
entries from the beginning of the MVR SFM Information Table.
The “Start from VLAN”, and “Group Address” input fields allow the user to select the starting point
in the MVR SFM Information Table. Clicking the “Refresh” button will update the displayed table
starting from that or the closest next MVR SFM Information Table match. In addition, the two input
fields will - upon a “Refresh” button click - assume the value of the first displayed entry, allowing
for continuous refresh with the same start address.
The “>>” will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text “No more entries” is shown in the displayed table. Use the “|<<”
button to start over.
Object
Description
VLAN ID
VLAN ID of the group.
Group
Group address of the group displayed.
Port
Switch port number.
Mode
Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis.
It can be either Include or Exclude.
Source Address
IP Address of the source. Currently, system limits the total number of IP source addresses
for filtering to be 128. When there is no any source filtering address, the text “None” is
shown in the Source Address field.
Type
Indicates the Type. It can be either Allow or Deny.
Hardware Filter/Switch Indicates whether data plane destined to the specific group address from the source IPv4/
IPv6 address could be handled by chip or not.
Auto_refresh
Check to refresh the page automatically every 3 seconds.
Refresh
Click to refresh the displayed table starting from the input fields.
|<<
Click to update the table starting from the first entry in the MVR SFM Information Table.
>>
Click to update the table, starting with the entry after the last entry currently displayed.
