INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 86
INSTRUCTION MANUAL
CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Apply
Click to apply changes.
Reset
Click to revert to previous values.
LACP
This page allows the user to inspect the current LACP port configurations and possibly change
them as well.
Object
Description
Port
The switch port number.
LACP Enabled
Controls whether LACP is enabled on this switch port. LACP will form an aggregation when 2 or
more ports are connected to the same partner.
Key
The Key value incurred by the port, range 1-65535 . The Auto setting will set the key as
appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting,
a user-defined value can be entered. Ports with the same Key value can participate in the same
aggregation group, while ports with different keys cannot.
Role
The Role shows the LACP activity status. The Active will transmit LACP packets each second, while
Passive will wait for a LACP packet from a partner (speak if spoken to).
Timeout
The Timeout controls the period between BPDU transmissions. Fast will transmit LACP packets
each second, while Slow will wait for 30 seconds before sending a LACP packet.
Prio
The Prio controls the priority of the port. If the LACP partner wants to form a larger group than
is supported by this device then this parameter will control which ports will be active and which
ports will be in a backup role. Lower number means greater priority.
Apply
Click to apply changes.
Reset
Click to revert to previous values.
