INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 191
INSTRUCTION MANUAL
CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Snooping Table
Each page shows up to 99 entries from the Dynamic DHCP snooping table, default being 20,
selected through the “entries per page” input field. When first visited, the web page will show the
first 20 entries from the beginning of the Dynamic DHCP snooping Table.
The “MAC address” and “VLAN” input fields allow the user to select the starting point in the
Dynamic DHCP snooping Table. Clicking the “Refresh“ button will update the displayed table
starting from that or the closest next Dynamic DHCP snooping Table match. In addition, the two
input fields will - upon a “Refresh” button click - assume the value of the first displayed entry,
allowing for continuous refresh with the same start address.
The “>>” will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text “No more entries” is shown in the displayed table. Use the “<<”
button to start over.
Object
Description
MAC Address
User MAC address of the entry.
VLAN ID
VLAN-ID in which the DHCP traffic is permitted.
Source Port
Switch Port Number for which the entries are displayed.
IP Address
User IP address of the entry.
IP Subnet Mask
User IP subnet mask of the entry.
DHCP Server Address DHCP Server address of the entry.
Auto_refresh
Check to refresh the page automatically every 3 seconds.
Refresh
Click to refresh the displayed table starting from the input fields..
Clear
Click to flush all dynamic entries.
|<<
Click to update the table starting from the first entry in the Dynamic DHCP snooping Table
<<
Click to update the table, starting with the entry after the last entry currently displayed.
