INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 145
INSTRUCTION MANUAL
CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
IP Subnet-based VLAN
The IP subnet to VLAN ID mappings can be configured here. This page allows adding, updating
and deleting IP subnet to VLAN ID mapping entries and assigning them to different ports.
Object
Description
Delete
To delete a mapping, check this box and press save. The entry will be deleted in the stack.
IP Address
Indicates the subnet’s IP address (Any of the subnet’s host addresses can be also provided here,
the application will convert it automatically).
Mask Length
Indicates the subnet’s mask length.
VLAN ID
Indicates the VLAN ID the subnet will be mapped to. IP Subnet to VLAN ID is a unique matching.
Port Members
A row of check boxes for each port is displayed for each IP subnet to VLAN ID mapping entry.
To include a port in a mapping, simply check the box. To remove or exclude the port from the
mapping, make sure the box is unchecked. By default, no ports are members and all boxes are
unchecked.
Adding a New
IP subnet-based
VLAN
Click “Add New Entry” to add a new IP subnet to VLAN ID mapping entry. An empty row is
added to the table, and the mapping can be configured as needed. Any IP address/mask can be
configured for the mapping. Legal values for the VLAN ID are 1 to 4095.
The IP subnet to VLAN ID mapping entry is enabled when you click on “Apply”. The “Delete”
button can be used to undo the addition of new mappings. The maximum possible IP subnet to
VLAN ID mappings are limited to 128.
Auto_refresh
Check this box to automatically refresh page every 3 seconds.
Refresh
Click to refresh the displayed table.
Apply
Click to apply changes.
Reset
Click to undo any changes made locally.
