INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 96
INSTRUCTION MANUAL
CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
IPMC Profile Rule Settings
This page provides the filtering rule settings for a specific IPMC profile. It displays the configured
rule entries in precedence order. First rule entry has highest priority in lookup, while the last rule
entry has lowest priority in lookup.
Object
Description
Profile Name
The name of the designated profile to be associated. This field is not editable.
Entry Name
The name used in specifying the address range used for this rule.
Only the existing profile address entries will be chosen in the selected box. This field is not
allowed to be selected as none ("-") while the Rule Settings Table is committed.
Address Range
The corresponding address range of the selected profile entry. This field is not editable
and will be adjusted automatically according to the selected profile entry.
Action
Indicates the learning action upon receiving the Join/Report frame that has the group
address matches the address range of the rule.
Permit: Group address matches the range specified in the rule will be learned.
Deny: Group address matches the range specified in the rule will be dropped.
Log
Indicates the logging preference upon receiving the Join/Report frame that has the group
address matches the address range of the rule.
Enable: Corresponding information of the group address, that matches the range specified
in the rule, will be logged.
Disable: Corresponding information of the group address, that matches the range
specified in the rule, will not be logged.
Rule Management
Buttons
You can manage rules and the corresponding precedence order by using the following
buttons:
Insert: Insert a new rule before the current entry of rule.
Delete: Delete the current entry of rule.
Up: Moves the current entry of rule up in the list.
Down: Moves the current entry of rule down in the list.
Add Last Rule
Click to add a new rule in the end of the specific profile's rule list. Specify the address entry
and configure the new entry. Click "Commit"
Commit
Click to commit rule changes for the designated profile.
Reset
Click to undo any changes made locally and revert to previously saved values.
