INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 71
INSTRUCTION MANUAL
CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object
Description
VLAN ID Filter Specify the VLAN ID filter for this ACE.
Any: No VLAN ID filter is specified. (VLAN ID filter status is “don’t-care”.)
Specific: If you want to filter a specific VLAN ID with this ACE, choose this value. A field for entering a
VLAN ID number appears.
VLAN ID
When “Specific” is selected for the VLAN ID filter, you can enter a specific VLAN ID number. The
allowed range is 1 to 4095. A frame that hits this ACE matches this VLAN ID value.
Tag Priority
Specify the tag priority for this ACE. A frame that hits this ACE matches this tag priority. The allowed
number range is 0 to 7 or range 0-1, 2-3, 4-5, 6-7, 0-3 and 4-7. The value Any means that no tag
priority is specified (tag priority is “don’t-care”.)
ARP Parameters
ARP/RARP
Specify the available ARP/RARP opcode (OP) flag for this ACE. Any: No ARP/RARP OP flag is
specified. (OP is “don’t-care”.) ARP: Frame must have ARP opcode set to ARP. RARP: Frame must have
RARP opcode set to RARP. Other: Frame has unknown ARP/RARP Opcode flag.
Request/Reply Specify the available Request/Reply opcode (OP) flag for this ACE. Any: No Request/Reply OP flag is
specified. (OP is “don’t-care”.) Request: Frame must have ARP Request or RARP Request OP flag set.
Reply: Frame must have ARP Reply or RARP Reply OP flag.
Sender IP
Filter
Specify the sender IP filter for this ACE.
Any: No sender IP filter is specified. (Sender IP filter is “don’t-care”.)
Host: Sender IP filter is set to Host. Specify the sender IP address in the SIP Address field that
appears.
Network: Sender IP filter is set to Network. Specify the sender IP address and sender IP mask in the
SIP Address and SIP Mask fields that appear.
Sender IP
Address
When “Host” or “Network” is selected for the sender IP filter, you can enter a specific sender IP
address in dotted decimal notation.
Sender IP
Mask
When “Network” is selected for the sender IP filter, you can enter a specific sender IP mask in dotted
decimal notation.
Target IP Filter Specify the target IP filter for this specific ACE.
Any: No target IP filter is specified. (Target IP filter is “don’t-care”.)
Host: Target IP filter is set to Host. Specify the target IP address in the Target IP Address field that
appears. Network: Target IP filter is set to Network. Specify the target IP address and target IP mask
in the Target IP Address and Target IP Mask fields that appear.
Target IP
Address
When “Host” or “Network” is selected for the target IP filter, you can enter a specific target IP address
in dotted decimal notation.
Target IP Mask When “Network” is selected for the target IP filter, you can enter a specific target IP mask in dotted
decimal notation.
ARP Sender
MAC Match
Specify whether frames can hit the action according to their sender hardware address field (SHA)
settings.
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
Any: Any value is allowed (“don’t-care”).
RARP Target
MAC Match
Specify whether frames can hit the action according to their target hardware address field (THA)
settings.
0: RARP frames where THA is not equal to the target MAC address.
1: RARP frames where THA is equal to the target MAC address.
Any: Any value is allowed (“don’t-care”).
