INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 194
INSTRUCTION MANUAL
CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Security
Access Management Statistics
This page provides statistics for access management.
Object
Description
Interface
The interface type through which the remote host can access the switch.
Received Packets
Number of received packets from the interface when access management mode is enabled.
Allowed Packets
Number of allowed packets from the interface when access management mode is enabled.
Discarded Packets
Number of discarded packets from the interface when access management mode is enabled.
Auto_refresh
Check to refresh the page automatically every 3 seconds.
Refresh
Click to refresh the page.
Clear
Click to clear all statistics.
Network
Port Security
Switch
This page shows the Port Security status. Port Security is a module with no direct configuration.
Configuration comes indirectly from other modules - the user modules. When a user module
has enabled port security on a port, the port is set-up for software-based learning. In this mode,
frames from unknown MAC addresses are passed on to the port security module, which in turn
asks all user modules whether to allow this new MAC address to forward or block it. For a MAC
address to be set in the forwarding state, all enabled user modules must unanimously agree on
allowing the MAC address to forward. If only one chooses to block it, it will be blocked until that
user module decides otherwise.
The status page is divided into two sections - one with a legend of user modules and one with the
actual port status.
