INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 42
INSTRUCTION MANUAL
CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Access Management
Configure access management table on this page. The maximum number of entries is 16. If the
application’s type matches any one of the access management entries, it will allow access to the
switch.
Object
Description
Mode
Indicates the access management mode operation. Possible modes are: Enabled: Enable access
management mode operation.
Disabled: Disable access management mode operation.
Delete
Check to delete the entry. It will be deleted during the next save.
VLAN ID
Indicates the VLAN ID for the access management entry.
Start IP address
Indicates the start IP address for the access management entry.
End IP address
Indicates the end IP address for the access management entry.
HTTP/HTTPS
Indicates that the host can access the switch from HTTP/HTTPS interface if the host IP address
matches the IP address range provided in the entry.
SNMP
Indicates that the host can access the switch from SNMP interface if the host IP address matches
the IP address range provided in the entry.
TELNET/SSH
Indicates that the host can access the switch from TELNET/SSH interface if the host IP address
matches the IP address range provided in the entry.
Apply
Click to apply changes.
Reset
Click to revert to previous values.
Add New Entry
Click to add a new access management entry.
