Commander Connect Owners Manual
51
Reminder Call
This feature enables you to set your Station to ring at a given time.
To set your Station to give you a Reminder Call at a given time
•
From the Idle Menu, press the Scroll Down Key (
) until ‘Reminder Call’ is displayed
•
Select ‘Reminder call’
•
Enter the time in the 24-hour clock format, for example, 1423 for 2.23 pm
•
Press ’Confirm’
At the programmed time the Station will give ten rings. If not answered, it will ring twice more at
two-minute intervals and will then cancel.
Note:
Alarm calls must be set daily and therefore cannot be set more than 24hrs ahead.
To review and cancel a Reminder Call
•
To review a Reminder Call, select ‘Reminder Call’ and the time set will be displayed.
Select ‘Confirm’ to retain the programmed time. If you wish to change the time, select
‘Change’ and enter a new time
•
To cancel the reminder call, select ‘Change’ followed by ‘Confirm’.
From a standard telephone, the code 718 is used to set a Reminder Call, and the code 718
*
is
used to cancel it. A standard telephone cannot query the Reminder Call time.
Station Reset
You can reset your Station to cancel all the following features if they have been set:
•
Do Not Disturb
•
Call Divert
•
Call Back
•
'Display' Messaging
•
Reminder Call
To reset your Keystation
•
From the Idle Menu, press the Scroll Down Key (
) to scroll downwards until ‘Reset the
telephone’ is displayed
•
Select ‘Reset the telephone’. The 'Display' shows ‘Station reset’ momentarily before
returning to the Idle Menu
If you are using a standard telephone, dial 739 and wait for the acknowledgement tone
(internal dial tone).
