Commander Connect Owners Manual
105
Programming CND Detection
On standard Analogue lines on the Commander Connect the 'CND Detection' option is
programmed. The system can then detect when CND information is being sent from the network
and display the number.
•
From the Programming Station, press the PROGRAM Key
•
Press the Scroll Down Key (
) until ‘System programming’ is displayed
•
Select ‘System programming’
•
Enter the System Programming Password
•
Select ‘Lines’
•
Press the Scroll Down Key (
) until ‘PSTN programming’ is displayed
•
Select ‘PSTN programming’
•
Press the Scroll Down Key (
) until 'CND Detection' is displayed.
•
Select 'CND Detection' The lines with 'CND Detection' programmed are indicated with
a
♦
Note:
For this feature to operate, this feature also needs to be enabled by your network
provider.
Programming Tone Dialling
On standard Analogue lines on Commander Connect the Tone dialling option is programmed.
The system sends digits dialled to the lines as tones rather than pulses.
•
From the Programming Station, press the PROGRAM Key
•
Press the Scroll Down Key (
) until ‘System programming’ is displayed
•
Select ‘System programming’
•
Enter the System Programming Password
•
Select ‘Lines’
•
Press the Scroll Down Key (
) until ‘PSTN programming’ is displayed
•
Select ‘PSTN programming’
•
Press the Scroll Down Key (
) until 'Tone Dialling' is displayed
•
Select ‘Tone Dialling'
•
The lines with Tone Dialling programmed are indicated with a
♦
.
