Commander Connect Owners Manual
109
Call Park
This is the time that elapses before a call placed on ‘Call Park’ rings back the parked call
Station
Ringback time duration
This is the time a Station will ring when Ringback has been invoked.
Auto-Attendant Day
The time a call to the auto attendant, when the system is in day mode, will ring before the
auto attendant will answer the call
.
Auto-Attendant Night
The time a call to the auto attendant, when the system is in night mode, will ring before the
auto attendant will answer the call.
Ans. Machine delay
This is the time that elapses before an unanswered incoming call is presented with the
Voicemail Answering Machine greeting.
Programmable message length
This is the maximum length of a message left in a Mailbox or a Greeting for a Mailbox, Auto
Attendant or Courtesy service.
AA dial time
This is the delay allowed between dialling the first and second digit when dialling through the
auto attendant (AA).
Hunt timer
This is the time a call will ring a station in a hunt group before it is diverted to the next station in
that group.
Notification Delay
This is the time delay between a mailbox receiving a message and a call is made to a pre-
programmed number to notify of a message received
Notification Interval
This is the time on which the pre-programmed number is called if the initial call to that number is
not answered.
Courtesy service length
This is the length of time the courtesy Service feature will keep an unanswered call on the
system before either (i) dropping the call (voice module not available) or (ii) sending the call to
the answering machine (voice module available).
To reset your system
There are two system reset options available – a warm and a cold reset.
•
From the Programming Station, press the PROGRAM Key
•
Press the Scroll Down Key (
) until ‘System programming’ is displayed.
•
Select ‘System programming’
•
Enter the System Programming Password
•
Select ‘System’
•
Press the Scroll Down Key (
) until ‘Reset options’ is displayed
•
Select ‘Reset!’ or ‘Reset to default!’
CAUTION: These are complete system resets, not individual Station resets.
Selecting ‘Reset!’ (warm reset) will reset the system and cut off all established calls.
Selecting ‘Reset to default!’ (cold reset) will reset the system, cut off all established
calls and remove all programming from the system.
