COMCOLOR FW 5000, User Manual

Page: 148 / 186

8-6
Chapter 8 Optional Equipment
ComColor FW Series User’s Guide
When [Program] is used, each set of printed
documents is stacked slightly apart from one
another to create separation.
For more information on configuring [Program], see
"Program" (p. 3-25) in "Print".
[OFF]
Offset output is not performed.
[Between Sets]
Each set of printed documents is stacked slightly apart
from one another.
[Between Groups]
Each group of printed documents is stacked slightly apart
from one another.
When [Separation] is used, each set of printed
documents is stacked slightly apart from one
another to create separation.
[OFF]
Offset output is not performed.
[Between Sorts]
Each sorted set is stacked slightly apart from one
another.
[After a Job]
Each print job is stacked slightly apart from one another.
<Paper that can be offset>
• When using the face down finisher:
131 mm × 148 mm - 305 mm × 550 mm (5 3/16" × 5
27/32" - 12" × 21 5/8")
1
Touch [Separation].
2
Select the offset output setting.
3
Touch [OK].
Staple at the specified position.
<Types of paper that can be stapled>
• Paper size: A3, B4, A4, A4-LEF
*1
, B5, B5-LEF, Ledger,
Legal, Letter, Letter-LEF, Foolscap
• Paper weight: 52 g/m
2
to 210 g/m
2
<Number of sheets that can be stapled>
• Standard size paper
A4, A4-LEF, B5, B5-LEF, (Letter, Letter-LEF):
2 - 50 sheets
*2
Sizes other than the above (A3, B4 (Ledger, Legal,
Foolscap)): 2 - 25 sheets
*2
*1 Long Edge Feed
*2 When using plain paper and recycled paper
(85 g/m
2
(23- lb bond))
■
Original Orientation
[Top Side Up]
Select this option when loading originals in an orientation
from which they can be read normally.
[Top Side Left]
Select this option when loading originals so that the top
of the original is aligned with the left edge.
■
Binding Edge
Select the binding edge of the paper.
Left, Right, Top
Offset Output (Program)
Copy Mode Settings
Offset Output ([Separation])
Staple
• When the printing job exceeds the maximum
number of sheets that can be stapled, a
confirmation screen is displayed so that you can
select whether to stop printing or continue
printing without stapling.
• Stapling cannot be performed when using
irregular-sized paper.
• The size of the paper that can be stapled varies
depending on the model. (p. 8-4 "Features of
the Face Down Finisher")
182 mm - 297 mm
(7 3/16" - 11 11/16")
257 mm - 432 mm
(10 1/8" - 17")
Paper feed
and output
direction