COMCOLOR FW 5000 Page 114 User Manual Download

Page: 114 / 186

USB

USB

ComColor FW Series User’s Guide

5-2

Overview of USB Operations

This section explains the basic operations in USB
mode.

You can save the scanned data to a USB flash drive.

●

1 Insert a USB flash drive into

the USB slot.

●

2 Load the original.

For more information on the types of originals that
can be used, see "Originals" in the "Safety
Information".

■

In the ADF

Load the original in the ADF.

Align the originals and place them face up.

Slide the original guides to match
the width of the originals.

■

On the Platen Glass

Open the original cover.

Load the original.

Load the original face down on the glass. Align
the corner of the original with the upper-left
corner of the glass.

Close the original cover.

Saving the Scanned Data
to a USB Flash Drive

• Open and close the original cover gently.

Summary of Contents for FW 5000


























































































































































































Search results

Summary of Contents for FW 5000

Reviews:

Related manuals for FW 5000

Brands by name

Popular brands

COMCOLOR FW 5000, User Manual

Search results

Summary of Contents for FW 5000

Reviews:

Related manuals for FW 5000

Brands by name

Popular brands