COMCOLOR FW 5000 Page 170 User Manual Download

Page: 170 / 186

Appendix

ComColor FW Series User’s Guide

9-2

About Ink Cartridges

When ink runs out, the ink replacement message is
displayed and printing stops. Replace the cartridge
of the color shown.

Open the front cover.

Remove the ink cartridge identified
as empty.

Confirm the color of the ink cartridge.

Remove the cap of the new ink
cartridge.

Affix the removed cap on the old ink cartridge.

Insert the new ink cartridge.

Position the ink cartridge so that the

▼

mark faces

upward, and insert it until it stops.

Close the front cover.

Ink Cartridge
Replacement

• Do not remove the ink cartridge until the ink

replacement message is displayed.

• When the remaining amount of ink is low, the

remaining ink indicator on the touch panel
screen flashes. Prepare a new ink cartridge for
the color that flashes.

Summary of Contents for FW 5000


























































































































































































Search results

Summary of Contents for FW 5000

Reviews:

Related manuals for FW 5000

Brands by name

Popular brands

COMCOLOR FW 5000, User Manual

Search results

Summary of Contents for FW 5000

Reviews:

Related manuals for FW 5000

Brands by name

Popular brands