CombiSteel 7280.0070, Instruction Manual

Page: 21 / 81

41
EN
EN
40
Remove the plastic pump filter only after emptying.
If the machine has a drain pump (option), keep pressed the “drain pump button” (3) to empty
the tank.
6.6 Cleaning function
At the end of the service, a final cleaning cycle can be activated manually. With the machine
switched on and door closed, press and hold the “drain pump button” (3) for 3 seconds.
The display will show “REMOVE OVERFLOW PIPE!” and “TANK DRAINING” and the button
7 turns purple. Open the door and remove the overflow pipe (if present). When the tank is
empty the display will show “SELF-CLEANING” and after a short pause the solenoid valve or
the rinse pump (PRS versions) will be activated for a set time, followed by draining. After the
draining time, the machine will go to OFF mode.
If the door is left open after pressing the “drain pump button” (3), the machine will only drain
the tank, and remains in standby for five minutes, after which it will go to OFF mode without
cleaning.
6.7 Cold rinse function (option)
A cold rinse can be done at the end of the entire wash cycle; the function is activated by
pressing the button 6 for 3 seconds and the LED 9 (blue) will light up.
At the end of the rinse cycle, after a pause, the button 7 lights up light blue and the display
will show the message COLD RINSE.
PURPLE
3
SELF-CLEANING
6.8 Energy Saving funcion
Green function: This function allows the boiler and tank temperatures to be
lowered during periods of machine inactivity, by controlling the temperatures.
During this phase, the display will show the message “GREEN FUNC. ON.”
At the start of the wash cycle the heating elements resume their standard operation.
6.9 Programming (user)
With the machine OFF, press the “access programming menu” button (2) for 3 seconds and
confirm with the “start cycle” button (7).
With the buttons 5 (+) and 6 (-), move to the parameter to modify and press the “start cycle”
button (7) to enable the edit. Using the buttons 5 (+) and 6 (-), select the desired value and
confirm by pressing the “start cycle” button (7) again. Press the “ESC” button (3) twice to exit
programming.
In the programming menu the user can change the following values
GREEN
WHITE
7 5 2
6 3
1
GREEN FUNC. ON
V:55°C B:82°C
MENU
USER MENU
LIGHT BLUE
9
6
COLD RINSE
Language IT,UK,FR,ES,DE,PT,NL ENGLISH
Temperature °C ÷ °F °C
Acoustic signal Off ÷ On Off
Initial message Off ÷ On Off
Initial text ******* -
Brightness 15 ÷ 90 % 75 %
Total cycles 0 ÷ 999999 -
Automatic cycle Off ÷ On Off
Description Value
Default
parameters