Safety Information
7
C2500CB-OM-EN-16
Caution
The warning and safety devices are installed to protect the life of the
operator and those working in the vicinity of the truck. Do not remove or
bypass any of the safety devices.
Combilift Ltd will not assume liability for injuries or damages arising from or
caused by the removal or bypassing of any the trucks safety or warning
devices.
The following safety devices may be fitted as optional extras:
Mast Up Drive Cut-out (If Fitted)
When the mast is raised above a predetermined height the drive is disabled.
To enable the drive, lower the mast below the drive cut-out height or press the
drive cut-out override button.
Mast Lift Cut-out (If Fitted)
When the mast is raised to a predetermined height it will stop automatically.
To continue raising the mast press the lift cut-out override button.
1.5
Warning Devices
The following warning devices are fitted to the truck as standard:
Horn
The horn is activated by pressing in the horn push button.
Sound the horn at intersections.
Stop and look for pedestrians or other traffic and proceed with caution.
Reversing Alarm
The reversing alarm is activated when the engine is running and reverse drive
is selected.
The reversing alarm may be wired as a motion alarm if required, in this
instance the alarm is activated in more than one direction.
Flashing Beacon
The flashing beacon is activated when the key switch is turned to the ON
position.
The following optional warning devices may be fitted to the truck if required:
Blue Safety Lights (if fitted)
Blue safety lights may be fitted that activate when a direction of travel is
selected.
