Components & Controls
31
C2500CB-OM-EN-16
Horn Button
The horn button is a push button located on the control
panel.
A decal depicting a horn is fixed above the button to identify
it.
Press the button to sound the horn.
Release the button to silence the horn.
Wiper Switch (If Fitted)
The wiper switch is mounted on the wiper motor (if fitted)
located in front if the steering column inside the operating
enclosure.
Flip the switch to the ‘ON’ position to activate the wiper.
Mast Height Drive cut-out Override Button (If Fitted)
The drive cut-out feature prevents the truck from driving if
the mast is raised above a set height. It is identified by a
decal fixed beside the button.
To re-commence driving the operator must either:
Lower the forks below the set cut-out height using the
lift control lever.
OR
Press and hold the drive cut-out override button (if
fitted) located on the control panel.
Operating Enclosure Cooling Fan Switch (If Fitted)
This is a 2 position rotary switch located on the control panel
(if fitted).
Turn the switch to the on position to activate the cooling fan
(if fitted) in the operating enclosure.
Direction Indicator Lights Switch (IF Fitted)
This is a three position rotary switch located on the control
panel. It is only used on trucks that have road lights fitted.
In the centre position the indicator lights are off.
When turning left rotate the switch anticlockwise to operate
the left hand side indicator lights (if fitted).
When turning right rotate the switch clockwise to operate
the right hand side indicator lights.
Operating Enclosure LED Light (If Fitted)
The operating enclosure light illuminates the interior of the
operating enclosure.
Press on the small circular recess on the bottom face of the
light housing to illuminate the light.
Press in the same place a second time to extinguish the
light.
