Safety Information
6
C2500CB-OM-EN-16
Warning
Never use the truck without the Overhead Guard/Cabin properly installed.
Do NOT drill, weld, straighten or bend the Overhead Guard/Cabin.
Allow only trained authorised personnel to install a new Overhead
Guard/Cabin.
1.4
Safety Devices
The following safety devices are fitted to the truck as standard:
Overhead Guard/Cabin
Replace the Overhead Guard/Cabin in any of the following instances:
If it has permanently deflected.
If a member is deformed.
If it has become corroded.
If it has been modified.
If the mounting structure, base, or mounting hardware is damaged.
Do not attempt to repair, straighten or reuse a damaged Overhead
Guard/Cabin.
Seat Belt
Adjust the seat belt to contact the body firmly when fastened.
Inspect the seat belt webbing for damage and replace if necessary.
Test the buckle and retractor and repair or replace if necessary.
Seat Switch
The truck will not operate unless the seat is occupied. When the seat is
unoccupied the drive and the hydraulic functions are disabled.
Seat Belt Switch (If fitted)
The optional seat belt switch disables the hydrostatic drive if the seat belt is
unbuckled.
Park Brake
The park brake prevents inadvertent movement of the truck.
Brake/Inch Pedal Brake Switch
The brake/inch pedal brake switch applies the park brake when the brake/inch
pedal is depressed and held in for 3 seconds or more.
Battery Isolator Key Switch
The battery isolator key switch allows the battery to be disconnected from the
electrical system.
