Maintenance
71
C2500CB-OM-EN-16
Note
Maintenance, replacement, or repair of the emission control devices and
systems may be performed by any non-road engine repair establishment or
individual.
Section 6: Maintenance
Combilift trucks are thoroughly examined, tested and lubricated before leaving the
factory; however, regular maintenance and lubrication are necessary to ensure smooth
running and maximum life of components.
The recommended maintenance periods in the maintenance schedule are for trucks
operating in normal, clean conditions when the specified fluids are used. For abnormal
temperatures, dust contamination areas or moist conditions, etc., more frequent
maintenance will be required. Maintenance periods should be halved when the truck
is operating in a harsh environment.
When carrying out maintenance work, the use of original parts is highly recommended.
These are specially designed for the truck and engine and ensure optimum
performance. Non-compliance may result in voidance of the warranty!
6.1
Basic Safety Instructions for Servicing and Inspection
Perform servicing and inspection work only if you have read and understood the
operator’s manual for the truck and the operator’s manual for the engine.
Observe the basic safety instructions and all the warning signs attached to the
truck.
The descriptions of work processes contained within this manual are provided
only for fully trained and competent maintenance staff with the necessary skills,
knowledge and experience to carry out the work safely.
Keep the operator’s manual with the truck at all times.
Perform servicing and inspection work only with suitable work clothing and
personal protective equipment.
Always wear safety glasses when performing servicing and inspection work.
Caution
The information contained in this section is provided for trained and
authorised service personnel only. The specialist skills and knowledge can
be obtained through training with Combilift Service.
Some maintenance tasks could result in serious injury or property damage
if performed incorrectly