Components & Controls
33
C2500CB-OM-EN-16
Note
When the truck is in neutral pressing the accelerator pedal will increase
the working speed of the hydraulic functions.
Note
The layout of the hydraulic levers is subject to change due to individual
customer requirements. Please refer to the decal on the individual truck.
Operators must acquaint themselves with the layout of all controls before
operating the truck.
Fork Positioning Control
The fork positioning lever controls the inward and outward
movement of the forks along the fork carriage.
If standard fork positioning is fitted both forks are controlled
simultaneously with a standard lever.
To bring the forks together, PULL the lever BACK.
To spread the forks apart, PUSH the lever FORWARD.
If individual fork positioning is fitted the position of each fork can
be controlled independently of the other. A lever with an
integrated rocker switch will be fitted in this instance.
Press and hold the left side of the rocker switch on top of the
lever to position the left fork only. Push the lever forward to move
the left fork outward. Pull the lever back to move the left fork
inward.
Press and hold the right side of the rocker switch on top of the
lever to position the right fork only. Push the lever forward to
move the right fork outward. Pull the lever back to move the right
fork inward.
Additional auxiliary functions may include telescopic forks and lift/drop forks. Control
of additional auxiliary functions is provided by a push button mounted on top of one of
the standard function levers. The button must be pressed and held while the lever is
being pushed/pulled to operating the auxiliary function.
Refer to the lever decal affixed to the control panel for the operation of any
auxiliary functions that have been fitted.
Operators MUST take time to familiarise themselves with the all functions and
how they are operated.
Independent Fork
Positioning Lever
