Components & Controls
30
C2500CB-OM-EN-16
Battery Isolator Key Switch
This switch is used to disconnect power from the
battery.
It is located inside the operating enclosure to the right
hand side of the control panel.
When the truck is not in use turn the switch to the ‘OFF’
position, by turning it ANTI-CLOCKWISE.
The truck will not start unless the switch is returned to
the ‘ON’ position, by turning the key CLOCKWISE
Ignition Key Switch
This is a three-position key switch located on the control
panel to the right hand side of the operators seat.
It is used to power up the trucks electrical system and to
start and switch off the engine.
4-Way Direction Lever
The 4-way direction control lever is a 5-position lever
located on the control panel. It can be set to forward,
reverse, left, right, or neutral.
In order to select a direction of travel, push the lever in the
desired direction.
Always return the lever to the neutral position when the
truck is not moving
Park Brake Switch
The park brake switch is a red push button located on the
control panel.
To APPLY the park brake, press the button down until it
locks into position with an audible click. The park brake light
will illuminate on the dash cluster to alert the operator that
the park brake is applied.
To RELEASE the park brake, rotate the button clockwise –
as indicated by the arrow - until it pops up.
The Machine will NOT drive with the park brake on.
Work Lights Switch
This is a three position rotary switch located on the control
panel.
In position 0 – All work lights are switched off.
Turn the switch clockwise to position 1 to illuminate the
forward facing work lights only.
Turn the switch clockwise to position 2 to illuminate all work
lights.
Note
The truck will NOT start unless the direction control lever is in neutral.
On
Off
