Maintenance
107
C2500CB-OM-EN-16
The locations of the mast bearings with wear pads that require periodic checking and
adjustment are identified below.
6.15 Fork Maintenance
This section provides details on how to perform a complete fork inspection. The forks
must be inspected at regular intervals - in accordance with the maintenance schedule
– with the aim of detecting any damage, failure, deformation, etc., that may impair safe
use. Any fork that bears such a defect must be removed from service.
!
Straightness of Blade and Shank
Check the straightness of the upper face of each blade and the front face of each
shank. If the deviation from straightness exceeds 0.5% of the length of the blade and/or
the height of the shank, respectively withdraw the fork from service.
Warning
Never operate the truck if the forks are damaged. If a defect is found in the
forks or mounting components take the truck out of service until the fork is
repaired or replaced. Report any fork damage to the relevant supervisor
immediately. Failure to follow this warning can cause serious injury or
death.