Maintenance
76
C2500CB-OM-EN-16
Note
The recommended maintenance intervals in the maintenance schedule are
for maintaining trucks operating in normal conditions.
Trucks operating under harsh conditions or in harsh environments will
require more frequent maintenance.
Local laws and regulations governing the maintenance of forklift trucks and
their engines may stipulate more frequent and more comprehensive
maintenance than that recommended in the maintenance schedule in this
manual.
Strictly follow all local laws and regulations regarding maintenance of the
truck and engine where applicable.
Note
Perform additional maintenance on the engine and fuel system as described
in the relevant engine maintenance manual. Contact your local Combilift
partner for assistance if required.
Perform all checks on the pre-use check sheet in conjunction with the maintenance
schedule tasks (see page 126).
6.4
Engine Oil System
The lubricating oil quality has a considerable influence on the life, performance and
thus also on the cost effectiveness of the engine.
Recommended Engine Oil Specification
Diesel Engine:
API – CI-4 / SAE 10W30
*
LP Gas Engine:
API – SN / SAE 10W30
*
Use API CJ-4 engine oil if the truck is fitted with a diesel particle filter (DPF).
Lubricating oil change intervals
The intervals depend on:
lubricating oil quality
sulphur content in the diesel fuel
type of application of engine
Caution
Switch off the engine before working on the lubricating system.
Wait until the engine and exhaust system are cool enough to touch before
commencing work.
