Operation
62
C2500CB-OM-EN-16
When in position, fully press the brake/inch
pedal then apply the park brake and
release the accelerator pedal.
Use the tilt to level the load then lower the
load gently onto the racking or stack.
Position the forks at a height to clear the
pallet/load without fouling on withdrawal.
Fully press the brake/inch pedal, select
reverse and check that the area behind the
truck is clear.
Press the accelerator pedal lightly to
increase the engine speed then gradually
release the brake/inch pedal until the truck
begins to move slowly in reverse.
Reverse, looking in the direction of travel.
Make occasional checks to prevent the
forks from fouling on withdrawal. Make any
necessary adjustments (always apply the
park brake and select neutral before
operating the hydraulic controls).
Stop and apply the park brake when the
fork tips are clear of the racking or stack.
Lower the forks to 100mm (4˝) above the
ground and tilt the mast back before
moving off.