Operation
70
C2500CB-OM-EN-16
Note
Where Diesel Particulate Filters (DPF) are fitted Diesel Fuels with a maximum
sulphur content of 15ppm (parts per million) MUST be used.
Diesel Fuels specified to EN 590 or ASTM D975 S15 are Strongly
Recommended.
5.20 Mechanical Release of Park Brake
To release the park brake:
1. Loosen off the screws (
A
) holding the end cover (
B
)
in place on one of the front wheel motors.
2. Repeat step 1 on the opposite front wheel motor.
To re-engage the park brake:
1. Retighten the screws (
A
) on one of the front wheel
motors (ensure the screws are retightened in a
diametrically opposite manner to the torque setting
specified below).
2. Repeat step 1 on the opposite front wheel motor.
Brake end cover screw torque: 14-16 Nm (10.3-11.8 ft.lb)
5.21 Diesel Particulate Filter (DPF)
Refer to the accompanying diesel particulate filter manual (only supplied if a DPF has
been fitted) for further details.
Caution
The truck must be secured to prevent it from rolling off before releasing the
park brake.
Re-engage the park brake as soon as the towing operation is complete.
B
A
Note
If a diesel particulate filter (DPF) is fitted to the truck then API CJ-4 engine
oil MUST be used.