General information
The entire electronic operating and control system is installed in a modern, elegant mo-
nitor. Its SMD-design guarantees high operation safety. The monitor can be operated in
all installation positions, because the front panel can be mounted reversibly. Monitor
and labeller are connected with two cables. One cable feeds the stepper motor, the
other connects the labeller peripherals with the monitor. A microprocessor controls all
labeller functions. To facilitate entering values in noisy environment, the foil keyboard is
provided with action point contacts. There are no potentiometers or controllers inside
the monitor. All parameters can be set via keyboard. (The stepper control was develo-
ped and produced by a well-known manufacturer of stepper motor drives.) The monitor
can be started or stopped by a signal from outside. The operating mode is displayed to
the outside by relay contacts.
Special characteristics of the Collamat
®
C8600/9100 monitor
Modern menu-driver operation
No controller or potentiometer
All important parameters can be set during labelling
32 program memories
All values and parameters can be stored
Two user levels
Modern design
Variable installation in systems
Due to amply dimensioned heatsink no fan is necessary
Connection to labeller with only two cables
Modern fail-safe electronics
Electric modular design with SMD-components
Variable labelling speed by incremental encoder or measuring light barrier
Nonstop operation with two Collamat
®
Remote control possible by SPC
Relay contacts for operating state indication
5999.530-01B 13.08.98 WM
Page 5 /
49
