Delayed Predispensing
In the
Delayed Predispensing
mode the predispensing
1
will only be tripped after re-
lease of the label scanner. Thus the following label will not be sticked on the good being
still under the adapter.
After having selected the
Delayed Predispensing
mode, the stop value
2
has to be
entered so that the label is perfectly dispensed and the following label does not contact.
This value should not exceed the label length. It can be smaller or greater than the pre-
dispensing. Under
'Stop at'
specify after which length labelling should be stopped and
passing of the goods should be waited for.
LABELLING MODE
DELAYED PREDISPENS.
Choice : Delayed Pre
Stop at 25 mm
User level:
programmer
Operating mode:
STOP
Course:
The dispensing process is started after the positioning delay and the goods have pas-
sed the goods scanner. In the first phase the label will be pulled forward as specified for
the value
'Stop at'
. When the good leaves the goods scanner, dispensing will be conti-
nued to the next positioning delay with a fixed speed until predispensing.
2
1
5999.530-01B 13.08.98 WM
Page 23 /
49
